• Lightide-emergency-led-garage-lights-vapor-tight-high-bay-battery-backup

Linear LED High Bay Emergency Lights Battery Backup

UL924 | 150 LPW | NPFA101 Compliance

Linear led high bay emergency lights can get people out of your building in case of power outages, blackouts, fires, lightning strikes, or any problem that causes an electric failure in a building.

  • Emergency Battery –  90~180 minutes of duration
  • Conforms to UL 924 & NFPA 101 Compliant
  • Excellent Performance – 150 lumens per watt.
  • Uniform illumination – via diffused or frosted polycarbonate cover
  • 5-year Warranty –  No-compromise warranty covered.
  • Listings: DLC, ETL/cETL, CE/RoHS

Features & Benefits

UL94-V0 Rating

Ensure high safe-standard Flame-retardant Rating

UL924 & CEC Titile 20

Keep 90~180 minutes of duration

Shatter-Proof

Ensure high safe-standard and impact rate to IK08.

High Efficacy

150 lumens per watt for clear cover

1-10VDC Dimmable

Compatible with Lutron 1-10vdc dimmer and other dimmers. 

Motion Sensor

Switches on the lamp linear LED High Bays when motion is detected.

IP65-Rated

Suitable for wet and damp locations.

5-Year Warranty

Including the case, led chip, driver, and cable.

Intelligent Automatic Detection System

  • Built-in an emergency battery with min. 90 min. duration.
  • Meets with standard CSA C22.2 NO. 141 and UL924. 
  • Intelligent emergency automatic detection function to achieve emergency mode.

Lightide-BATTERY-BACKUP-of-emergency-led-garage-lights-1
Lightide NFPA 101 Compliant LED Lights

NFPA 101 Compliant

Each battery backup high bay light fixture provides at least 90 min. of illumination, with an average of 1-footcandle and a minimum of 0.1-footcandle when installed according to guidelines.

The integrated self-diagnostic circuitry will automatically conduct monthly 30-second and annual 90-minute tests to verify proper emergency capability per Life Safety Code requirements.

Conduit Fitting-Liquid Tight Connector 

The UL-approved straight liquid tight connector is used to terminate and seal metallic,  and non-metallic “Type B” liquid-tight conduit to a steel outlet box or any other metallic enclosure in either dry or wet locations. This connector is furnished with a sealing ring and zinc locknut and is suitable for use in Class 1 Division 2, Class II, Divisions 1 & 2, and Class III, Divisions 1 & 2 per NEC 501.30 (B). 

Lightide-Liquid-tight-connertor-of-led-vapor-tight

SPECIFICATION

DOWNLOAD

INQUIRY NOW

Order Information | Linear led High Bay

Sample:  LT-TPA456-50K-EM-PC

LT- TP -A -4 -56 -50K -EM -PC
            Accessory: MS=Motion Sensor, PC=Photocell, EM=Emergency Kit
CCT: 30K=3000K, 40K=4000K, 50K=5000K, 57K=5700K, T= 3000K-4000K-5000K Selectable
Power  code: 20=20w, 36=40w, 40CP= 32W-40W-50W Selectable,  100=100w
Length  Code: 2=2′, 4=4′, 8=8′
 Code: A, B, C
Desc: Vapor Tight rated led high bay light

 

Specification | Linear led High Bay

Model# Rating  Lumen Output Equivalent Emergency Length Voltage  CCT Option  
LT-TPA220-EM 20W 2600 lm (Clear) 2x16w   Li-ion/Ni-MH 2′ 100-277VAC 2700K-6500K REVIEW
LT-TPA436-EM 40W 5700 lm (clear) 2X36W 4′ 2700K-6500K REVIEW
LT-TPA440CP-EM